|
Ozone Monitors
Ergonomically designed, state of the art ozone monitors, measure ozone
levels with high accuracy, rapid T90 response and operational simplicity.
We offer a range of high quality ozone monitors, from our simple ozone
controller to our more advanced data logging and networked products.
Series 100
The Series 100 ozone controller is designed to be operated as part of an
ozone generator control circuit or alarm system.
Integrated ozone monitor,
controller and switch is designed to be operated as part of an ozone
generator control circuit or alarm system.
|
Features
- High accuracy
- Rapid T90 response
- Replaceable sensor head
- Wall or ceiling mounted
- External control signals
|
 |
Monitor Specifications
| Sensor type |
Gas Sensitive Semiconductor (GSS) |
| Measurement range |
|
| Low
concentration Ozone Head |
0.000 to 0.500 ppm |
| High
concentration Ozone Head |
0.00 to 5.00 ppm |
| Accuracy |
|
| Low
concentration Ozone Head |
+/- 0.010 ppm (0 to 0.100 ppm) |
|
+/- 10% (0.100 to 0.500 ppm) |
| High
concentration Ozone Head |
+/- 10% (0.20 to 5.00 ppm) |
| T90 response time (standard) |
|
| Low
concentration Ozone Head |
100 seconds |
| High
concentration Ozone Head |
35 seconds |
| Operating temperature range |
-5”ĘC to 50”ĘC |
| Relative humidity limits |
5% and 95% |
| Removable/replaceable sensor heads |
Yes |
Controller/Switch Specifications
• User adjustable high and low control and switching set
points
• User adjustable control ”®dead band”Æ
• External trigger signal for control and switching (user
supply): 12 volts, 150 mA
• LED status indicators: High/low/within control band,
fault/failure
• Power Requirements (User supplied): 12 VDC, 400 mA
• Unit Interface (power in, control signal out): RJ45
connector.
• Height (with monitor): 64 mm; Diameter of base: 130 mm
Low concentration Ozone Sensor Head
The low concentration ozone sensor head has been designed to not
normally require recalibration for the life of the sensor head.
High concentration Ozone Sensor Head
The high concentration ozone sensor head is designed to
provide a rapid T90 response. To maintain accuracy, an on-board
reset routine can be implemented periodically (in the absence of
ozone). This operation is a performed on a S300, or S500 monitor via
the "Reset routine" menu option during routine maintenance
cycles. The frequency of the maintenance cycle is dependant on the
application conditions and level of accuracy required by the user.
|
Series 300
The Series 300 provides a high level of functionality & monitoring
capability.
AeroqualӮs ergonomically designed, state of the art Ozone
monitors, measure Ozone levels with high accuracy and operational
simplicity.
|
Features
- High accuracy
- Rapid T90 response
- Replaceable sensor head
- External control signals
- Remote sensor capability
- Portable & wall mountable
- High/low alarm
- Battery and/or mains power
|
 |
Specifications
| Sensor type |
Gas Sensitive Semiconductor (GSS) |
| Measurement range |
|
| Low
concentration Ozone Head |
0.000 to 0.500 ppm |
| High
concentration Ozone Head |
0.00 to 5.00 ppm |
| Accuracy |
|
| Low
concentration Ozone Head |
+/- 0.010 ppm (0 to 0.100 ppm) |
|
+/- 10% (0.100 to 0.500 ppm) |
| High
concentration Ozone Head |
+/- 10% (0.20 to 5.00 ppm) |
| T90 response time (standard) |
|
| Low
concentration Ozone Head |
100 seconds |
| High
concentration Ozone Head |
35 seconds |
Display type
|
High resolution LCD |
| Resolution |
|
Low
Concentration Ozone Head
|
0.001 ppm |
High
Concentration Ozone Head
|
0.01 ppm |
| Operating temperature range |
-5”ĘC to 50”ĘC |
| Relative humidity limits |
5% and 95% |
| Measurement units |
ppm or mg/m3 |
| Removable/replaceable sensor heads |
Yes |
| On-board alarm |
Yes |
| Alarm status displayed |
Yes |
| Battery status indication |
Yes |
| Alarm mute function |
Yes |
| Sensor condition status |
Yes |
| Stand-by mode |
Yes |
| External signals |
|
| Control |
12VDC, 150 mA |
| Alarm |
12VDC, 150 mA |
| Analogue output |
0-5 V |
| Power supply |
12 VDC, 800 mA |
| Rechargeable battery pack (optional) |
9.6V Ni-MH (4 hours operation) |
| Portable (with optional battery pack) |
Yes |
| Permanently fixable |
Yes, Screw fix |
| Remote Sensor Capability |
Yes |
Low concentration Ozone Sensor Head
The low concentration ozone sensor head has been designed to not
normally require recalibration for the life of the sensor head.
High concentration Ozone Sensor Head
The high concentration ozone sensor head is designed to
provide a rapid T90 response. To maintain accuracy, an on-board
reset routine can be implemented periodically (in the absence of
ozone). This is via the "Reset routine" menu option during
routine maintenance cycles. The frequency of the maintenance cycle
is dependant on the application conditions and level of accuracy
required by the user.
|
Series 500
The Series 500 includes the same features and functionality of the Series
300 but with the added feature of onboard and PC data logging.
AeroqualӮs ergonomically
designed, state of the art Ozone monitors, measure Ozone levels with
high accuracy and operational simplicity.
|
Features
- High accuracy
- Rapid T90 response
- Onboard & PC data logging
- Replaceable sensor head
- External control signals
- Remote sensor capability
- Portable & wall mountable
- High/low alarm
- Battery and/or mains power
|
 |
Specifications
| Sensor type |
Gas Sensitive Semiconductor (GSS) |
| Measurement range |
|
| Low
concentration Ozone Head |
0.000 to 0.500 ppm |
| High
concentration Ozone Head |
0.00 to 5.00 ppm |
| Accuracy |
|
| Low
concentration Ozone Head |
+/- 0.010 ppm (0 to 0.100 ppm) |
|
+/- 10% (0.100 to 0.500 ppm) |
| High
concentration Ozone Head |
+/- 10% (0.20 to 5.00 ppm) |
| T90 response time (standard) |
|
| Low
concentration Ozone Head |
100 seconds |
| High
concentration Ozone Head |
35 seconds |
Display type
|
High resolution LCD |
| Resolution |
|
Low
Concentration Ozone Head
|
0.001 ppm |
High
Concentration Ozone Head
|
0.01 ppm |
| Operating temperature range |
-5”ĘC to 50”ĘC |
| Relative humidity limits |
5% and 95% |
| Measurement units |
ppm or mg/m3 |
| Removable/replaceable sensor heads |
Yes |
| On-board alarm |
Yes |
| Alarm status displayed |
Yes |
| Battery status indication |
Yes |
| Alarm mute function |
Yes |
| Sensor condition status |
Yes |
| Stand-by mode |
Yes |
| External signals |
|
| Control |
12VDC, 150 mA |
| Alarm |
12VDC, 150 mA |
| Analogue output |
0-5 V |
| Power supply |
12 VDC, 800 mA |
| Rechargeable battery pack (optional) |
9.6V Ni-MH (4 hours operation) |
| Portable (with optional battery pack) |
Yes |
| Permanently fixable |
Yes, Screw fix |
| Remote Sensor Capability |
Yes |
| Data interface with PC |
Yes, Serial RS232 |
| On Board Data Logging |
8,000 data points |
| Data logging independent of PC |
Yes |
| Data logging direct to PC |
Yes |
| On-board real-time clock |
Yes |
| Data logging software supplied |
Yes |
Low concentration Ozone Sensor Head
The low concentration ozone sensor head has been designed to not
normally require recalibration for the life of the sensor head.
High concentration Ozone Sensor Head
The high concentration ozone sensor head is designed to
provide a rapid T90 response. To maintain accuracy, an on-board
reset routine can be implemented periodically (in the absence of
ozone). This is via the "Reset routine" menu option during
routine maintenance cycles. The frequency of the maintenance cycle
is dependant on the application conditions and level of accuracy
required by the user. |
Remote Monitoring
Our remote monitoring products allow for sensors to be located remotely
from the monitor. This allows for ozone concentrations to be measured from
a distance.
Ozone Monitors
- Remote Sensor Head Option R10
The Remote Sensor Head Adaptor Kit is designed to allow the sensor
head to be located up to 14 metres away from the Series 300 or 500
Monitor.
|
Features
- Ergonomically designed
- Interfaces with Series 300, and Series 500
- Standard connection
- Simple plug & play solution
|
 |
Specifications
| Remote Adaptor Base |
Sensor height: 64 mm |
| |
Sensor base diameter: 130 mm |
| Remote Cable |
2 m Standard Cat 5
cable, RJ45 connectors |
|
Maximum distance using Standard Cat 5
cable: 14 m (greater distances can be achieved by
using different cable) |
| Remote Sensor Head |
Minimum voltage
supply at head 11 VDC |
| Components Supplied |
Sensor head adaptor
|
|
|
Monitor adaptor |
|
Cat 5 Cable |
”” |
Networked Products
The remote multi-sensor network product utilises our high functionality
software to provide specialised realtime monitoring, control and
datalogging.
|