GasAlert100

2003.11 new products

GasAlert100

Zero-Maintenance Detectors

H₂S, CO

Compact and lightweight, the new GasAlert100 provides 100 days of continuous, maintenance-free protection from H2S or CO. With two alarm levels and an alphanumeric LCD, the intrinsically safe GasAlert100 is a practical solution to plant turnarounds and short-term work projects.

One-button operation activates a daily self-test and displays alarm setpoints and peak alarm exposure encountered. Life remaining is continuously displayed, in days and then hours.

Features

100 days of continuous protection
Continuous, alphanumeric LCD
Records and displays peak alarm encountered
Small size--1.0 x 1.45 x 2.3 in. / 26 x 37 x 58 mm
Light--weighs just 1 oz. / 30 g
Maintenance free--no sensor or battery replacement, no calibration, no downtime

Self-Tests

Daily, full function self-test verifies sensor and circuitry integrity
Battery is tested continuously (auto) and on demand
Manual self-test on demand

GasAlertClip

Zero-Maintenance Detectors

H₂S, CO, SO₂ or O₂

작업 현장에서의 산소 결핍, 독성 가스로 인한
인명 피해을 막는 혁대착용 단일 가스측정기

- H₂S, CO, SO₂ or O₂가스 측정, 버튼 셋팅후 2년간 연속 측정 가능 (소모성 가스 측정기임)

- 초소형, 초경량으로 휴대 용이(약 73g),내부진동기능(옵션 약83g)

- 자가진단기능(센서,내부회로,밧데리,경고 램프, 경고음에 의한 상태 알림 기능, 자가진단) 가스 측정 가능 시간 전면 표시 (예: 24 months), Low , High 2개의 경보 레벨 표시, 내부 진동 경보 기능(옵션), 교정이 불필요함. Battery 및 쎈서 교환이 필요없슴(2년간 연속 사용 가능), 최대, 최소 경보 셋팅 수치 표시 기능. Self Test 기능 있슴.

- UL 및 CE 본질 안전방폭 인증 획득(EEX ia IIC T4)

- 조명 기능이 있는 4 X 12 문자의 LCD 부착

- 전기,전화 케이블공사,맨홀작업,제철소, 발전소, 가스 시설물,석유화학공장, 폐수처리장등에 적합

Self-Tests (Auto and On Demand)

Full function self-test verifies sensor, circuitry and battery integrity

GasAlert

Single-Gas Detectors

H₂S, CO, SO₂, Cl₂, HCN, NO₂, NH₃, PH₃ or O₂

가스 사용중 누출된 가스를 사전에 검지 측정 경보하기
위하여 개발된 대기확산식,휴대용 가스 측정기

- 측정가스 O2, CO, H2S, SO2, NO2, Cl2, H2, HCN, NH3, PH3,

- 전지전압 에러, 자기진단 에러, 영점 및 스팬 진단 에러,자동 표시장치 회로 내장

- 표시장치 4 X 12 문자 LCD / 밧데리 수명 9000시간 이상

- 선택사항 진동모드(확장버전),케이스 RFI(Radio Frequency Interference)방지

- UL 및 CE 본질 안전방폭 인증 획득(EEX ia IIC T4)

- 전기,전화 케이블공사,맨홀작업,제철소, 발전소, 가스 시설물,석유화학공장,
폐수처리장등에 적합

GasAlert LEL

Single-Gas Detectors

Combustible Gases and Vapors (0-100% LEL)

가스 사용중 누출된 가스를 사전에 검지 측정 경보하기
위하여 개발된 대기확산식휴대용, 가스 측정기

- 측정가스 : LPG, LNG. (일반적인 가연성 가스)

- 전지전압 에러, 자기진단 에러, 영점 및 스팬 진단 에러,자동 표시장치 회로 내장

- 표시장치 4 X 12 문자 LCD / 밧데리 수명 16시간 이상

- 선택사항 (진동모드), 케이스 RFI(Radio Frequency Interference)방지

- UL 및 CE 본질 안전방폭 인증 획득(EEX ia IIC T4)

- 전기,전화 케이블공사,맨홀작업,제철소, 발전소, 가스 시설물,석유화학공장,
폐수처리장등에 적합

GasAlertMax

Multi-Gas Detectors

H₂S, CO, O₂, Combustibles

각종 가스 사용 시설에서 누출된 가스를 사전에
탐지하는 고성능 자동 흡입식 휴대용 가스 누설 측정기

- O2, CO, H2S, 가연성가스 (CH4)

- 자가진단기능(센서,내부회로,밧데리,경고 램프, 경고음에 의한 상태 알림 기능, 자가진단)
및 LAMP 작동으로 어두운 장소나 좁은 공간에서도 효율적으로 사용이 가능

- 자동 흡입형으로 소형 MICRO PUMP 내장

- UL 및 CE 본질 안전방폭 인증 획득(EEX ia IIC T4),파격적이면서 확실한 A/S.

- 가스시설물, 화학공장, 정유공장, 탄광, 주차설비, 빌딩관리,터널,가스보급소, 가스충전소,
선박, 항공 등 산업현장에 폭넓게 활용

BW Defender2

Multi-Gas Detectors

H₂S, CO, O₂, Combustibles

각종 가스 사용 시설에서 누출된 가스를 사전에 탐지하는
고성능 대기확산식, 수동 흡입식 휴대용 가스 누설 측정기

- O2, CO, H2S, 가연성가스 (CH4)

- 자가진단기능(센서,내부회로,밧데리,경고 램프, 경고음에 의한 상태 알림 기능, 자가진단) 및
LAMP 작동으로 어두운 장소나 좁은 공간에서도 효율적으로 사용이 가능

- 수동 흡입형 및 대기확산형 으로 검지 측정

- UL 및 CE 본질 안전방폭 인증 획득(EEX ia IIC T4),파격적이면서 확실한 A/S.

- 가스시설물, 화학공장, 정유공장, 탄광, 주차설비, 빌딩관리,터널,가스보급소, 가스충전소,
선박, 항공 등 산업현장에 폭넓게 활용

GasAlertMicro

Multi-Gas Detectors

H₂S, CO, O₂, Combustibles

각종 가스 사용 시설에서 누출된 가스를 사전에
탐지하는 대기확산식 휴대용 가스 누설 측정기

- O2, CO, H2S, CH4(가연성 가스)

- 대기확산식으로 자동흡입펌프 착탁이 가능한 구조의 펌프(option)

- UL 및 CE 본질 안전방폭 인증 획득(EEX ia IIC T4),파격적인 가격, 확실한 A/S.

- 가스시설물, 화학공장, 정유공장, 탄광, 주차설비, 빌딩관리,터널,가스보급소, 가스충전소,
선박, 항공 등 산업현장에 폭넓게 활용

MicroDock

저렴한 비용으로 Gas Alert Micro 가스측정기 관리 가능

BW 사 신제품으로, the MicroDock 은 자동 교정 기능, 시험 및 기록 저장 시스템으로서 경쟁력이 있는 가격으로 GasAlertMicro 의 교정 및 경보 시험이 가능 하다. 휴대형이면서 여러대의 교정을 동시에 할 수 있게 증설이 가능하다. 컴퓨터가 없이도 최대 10개의 GasAlertMicro 의 교정 및 검사가 가능하다.

MicroDock의 자동화 기능으로 비용 과 시간이 필요한 정기적인 수리보전의 비용을 절약 가능하다. MicroDock은 각 Gas Alert Micro 계기의 기록이 남으므로 최소의 비용으로 최대의 효과를 얻을 수 있다.

GasAlertClip Extreme

H₂S, SO₂, CO or O₂

BW Technologies has raised the bar for maintenance-free detection with the new GasAlertClip Extreme. Providing two years of protection from H2S, SO2, CO or O2, the water-resistant GasAlertClip Extreme has a built-in concussion-proof boot and is ideal for amphibious operations and high-moisture environments.

Equipped with two alarm levels and an internal vibrator, the GasAlertClip Extreme now features four visual LEDs, and a high-output audible alarm.. The large, alphanumeric display provides instant notification of gas alarms, test status, life remaining (months then days then hours) and peak (maximum) exposures encountered.

The GasAlertClip Extreme`s advanced microprocessor performs a full function self-test automatically on startup and on demand to verify sensor, circuit and battery integrity, as well as audible/visual alarm operation.

Generating a permanent record of gas alarm events has never been easier. The GasAlertClip Extreme allows for effortless transmission of stored event data to a cordless printer or a PC for review and analysis.

Despite being loaded with features, the GasAlertClip Extreme is compact and light, which makes it comfortable to wear. Clip it to your lapel, pocket, belt or hardhat for unequalled protection.

GasPoint

4-20 mA Gas Transmitters

H₂S, CO, Combustibles

The self-contained GasPoint transmitter with internal alarm relays provides a 4-20 mA output signal and can be connected to any control system (DCS, PLC or controller). With advanced sensor technology and microprocessor-based operation, GasPoint provides continuous monitoring for H₂S, CO or combustibles.

GasPoint's ease of use and cost of ownership advantages make it the ideal fixed system transmitter. No junction box connection is required, and sensors can be changed at will. GasPoint
will recognize the type of sensor installed, test it
and reset itself to the corresponding sensor type.

Features

Non-intrusive, one-person automatic calibration via single external pushbutton
Equipped with three (3) 5-amp relay contacts--two (2) alarms and one (1) fault
Normally energized/de-energized and latching/non-latching alarm relay functions
Two (2) backlit alphanumeric LCDs advise all gas
hazards and operational faults, as well as instrument
and sensor statuses
Auto zero and auto span functions
Backlight in low light (auto) and in alarm (auto)
Extensive fault diagnostics

GasPoint

4-20 mA Gas Transmitters

H₂S, CO, Combustibles

The rugged, zero-maintenance RRJ Series transmitters for H₂S or combustibles come complete with sensor and provide a 4-20 mA
signal that is compatible with any 4-20 mA controller, DCS or PLC.

No calibration, no sensor replacement, no downtime
Encapsulated polyurethane housing
Quick-connect, military style plug-in wiring
2 year operational life
High-output LED visual alarm
Input voltage--10 to 28 VDC for industry
standard compatibility
Electrochemical sensor for H₂S; catalytic bead sensor
for combustibles

Self-Test

Full function sensor integrity test (daily; auto)

GasProbe

Combustion Gas Analyzer

CO, O₂, CO₂, CO/CO₂, in. WC/mbar, ^oF/^oC

The low-cost, handheld GasProbe is five instruments in one: flue gas analyzer, gas appliance tester, ambient air monitor, draft measurement device and thermometer.

Economically priced professional kits (standard or deluxe), long-life VersaPak battery power and user-friendly operation mean extraordinary cost of ownership advantages.

Real-time digital readings of O₂, CO, CO₂, CO/CO₂ ratio and stack
air temperatures
Calculates combustion efficiency of five fuels: natural gas, LPG, light oil, heavy oil and solids
Small, compact and lightweight
Large, multi-parameter LCD
Flashing, wide-angled alarm bar
Variable pulsed 70 dB audible alarm
Two (2) operational modes: combustion gas analysis and ambient air safety
Factory set LOW and HIGH alarm levels for CO and O₂
Automatic, continuous backlight in low-light conditions
Downloadable time and date datalogging
Electrochemical sensors
Automatic calibration of O₂ sensor, sampling pump and pressure sensor on startup
External water trap/filter
Internal pump filter
Simple, intuitive operation

ToxyClip2

Zero-Maintenance Detectors

H₂S or CO

Available in 2 and 1-year models, TOXYCLIP2 requires no calibration and continuously monitors for H2S or CO. With
no downtime or maintenance required, TOXYCLIP2 delivers
cost-effective personal protection.

The alphanumeric LCD shows life remaining in months, days and hours. Access alarm setpoints and peak exposures on demand.

Features

Continuously ON
Records and displays maximum alarm encountered
High-output audible and visual alarms (90dB)
LOW and HIGH alarm setpoints displayed on command
Safety shutdown mode
Life remaining readout in months,days and hours

Self-Tests (Auto and on Demand)

Full function self-test verifies sensor, circuitry and
battery integrity
Battery test every 2 hours (auto)

ToxyClip for O₂

Zero-Maintenance Detectors

O₂

GasProbe CO

Carbon Monoxide Meter

Accurate, compact and lightweight, the GasProbe CO provides fast, accurate sampling of CO concentrations from 0 to 1,000 parts per million.

GasProbe CO is ideal for technicians, fire department personnel and other professionals who need to measure CO levels in potentially hazardous environments.

LCD displays CO levels from 0-1,000 ppm
LCD backlight activates automatically in low-light conditions
Automatic sensor zeroing and self-test sequence upon start-up
Stores and displays the maximum CO levels encountered
CO level beeper can be silenced if desired
Automatic power-off after 20 minutes
Simple, automatic calibration procedure
Easy-to-replace 9 VDC battery (battery life~500 hours)
Stabilized electrochemical CO-specific sensor
Typical 3-year sensor life; 1-year calibration cycle

SamplerPak

Designed for use with most BW single-gas and multi-gas detectors, the Sampler is an ideal confined space entry accessory. Simply attach it to your detector and activate for continuous remote sampling.

With a rugged pump and a robust, ergonomic design, the Sampler features intelligent diagnostics that tell the instrument when to calibrate itself. Motor speed is self-regulating to provide consistent airflow in ever-changing environmental conditions, and a 30-hour runtime on 2 AA alkaline or NiMH batteries ensures trouble-free operation through multiple shifts.

Features

Compact (7.4 x 1.3 x 2.1 in. / 18.8 x 3.35 x 5.4 cm) and lightweight (6.2 oz. / 175 g)
Compatible with most BW single-gas and multi-gas detectors, including GasAlert and GasAlertMicro
Pump constantly monitors itself for proper performance
Low flow alarm, battery alarm and system fault alarm with audible/visual warnings
Unique, manual flow-block test verifies proper performance
Up to 30 hours of continuous operation on a single set of AA alkaline or rechargeable NiMH batteries
Built-in water trap and particulate filters
Optional extra-long probes and sampling hoses available

GasProbe IAQ

Temp, RH, CO, CO2, Data Logging

simultaneously monitors four crucial indoor air quality parameters: carbon monoxide, carbon dioxide, temperature and relative humidity. The instrument displays instantaneous readings on its easy-to-read LCD display. The GasProbe IAQ is available with a real-time clock data logging capacity of 77 days. Additional features include plug-in sensors, RFI protection, audible and visual alarms and peak reading memory. What’s more, a full line of accessories makes the instrument even more versatile.