IL-2000 click on image for larger view In-line Static Eliminator for Pneumatic Conveyance The IL-2000 is a convenient solution to the static build-up common in pneumatic conveyance systems, whether vacuum based or positive pressure. When materials are conveyed pneumatically, their constant movement often leads to static charges. The result can be jammed or clogged systems, problems with the materials as they exit the conveying system, or unwanted mixing as one batch of material is not completely removed from the system due to static cling. The IL-2000 solves these problems by introducing ionization directly into your material conveying line. Standard sizes to accommodate lines up to 25cm (10in) in diameter are available. Installation is easy – simply open your line and press-fit to flexible piping, or use compression couplings for metal-to-metal joints. If your line is smaller than one of our exact diameters, use reducers to adapt the next larger size IL-2000 to your line. Both reducers and compression couplings are available from Chapman. The IL-2000 is a dual-phase system for maximum static elimination. When one point is emitting positive ions, the opposing point emits negative ions, so even fast moving materials are thoroughly ionized.

	click on diagram for larger view
	Dual Phase Static Elimination For more complete in-line ionization For especially fast moving materials, dual phase static elimination ensures maximum exposure to ionization. In single phase systems, Alternating Current produces successive waves of positive and negative ions 50-60 times per second (50/60 Hz). This is sufficient for complete static elimination in most cases. When material is fast-moving, as in pneumatic conveyance, the additional ionization of a dual phase system maximizes the exposure of the target material. When one emitter is producing positive ions, the opposite emitter produces negative ions. Since the positive and negative ions are produced simultaneously, they are available in constant abundance to eliminate static. Chapman’s dual phase power supply, part number 11476-xxx, is not limited to use with the IL-2000. Use it to power two bars for dual-phase static elimination in any fast-moving process.
	View of the interior of the IL-2000 – dozens of emitters neutralize your material. Dual phase, so opposing emitters produce ions of opposite polartities. Our unique In-Line Air Assist keeps points clean and maximizes static elimination. click on image for larger view	click on diagram for larger view

SPECIFICATIONS Conveying Tube: Stainless Steel Ionization Housing: PVC Overall Length: 610mm (24in) Effective Length: 305mm (12in) Cables: 3m (10ft), shielded Air Consumption: Less than 12 SCFM when using In-Line Air Assist Maximum Input Pressure: (if In-Line Air Assist is used) 10 PSIG Conveying Line Pressure: -16in Hg minimum (vacuum system) +8 PSIG maximum (positive pressure) Caution: Not to be used for powders due to risk of ignition. Rated for indoor use only.

ORDERING INFORMATION Product # Description 57502-001 IL-2000, 44mm (1.75in) diameter 57502-002 IL-2000, 64mm (2.5in) diameter 57502-003 IL-2000, 102mm (4in) diameter 57502-004 IL-2000, 152mm (6in) diameter 57502-005 IL-2000, 254mm (10in) diameter 11476-xxx See Power Supplies Dual Phase Power Supply, 5000 volt output, switchable 120 or 240 volt, pilot light and on/off switch Optional Equipment 57504-001 Reducer, 44 x 32mm (1.75 x 1.25in) 57504-002 Reducer, 44 x 38mm (1.75 x 1.5in) 57504-003 Reducer, 64 x 51mm (2.5 x 2in) 57504-004 Reducer, 102 x 76mm (4 x 3in) 57504-005 Reducer, 152 x 127mm (6 x 5in) 57503-001 Compression Coupling, 32mm (1.25in) 57503-002 Compression Coupling, 38mm (1.5in) 57503-003 Compression Coupling, 44mm (1.75in) 57503-004 Compression Coupling, 51mm (2in) 57503-005 Compression Coupling, 64mm (2.5in) 57503-006 Compression Coupling, 76mm (3in) 57503-007 Compression Coupling, 102mm (4in) 57503-008 Compression Coupling, 127mm (5in) 57503-009 Compression Coupling, 152mm (6in)