An intelligent.highly precise resistivity meter that quickly and accuratery carries out measurements for various shapes of samples in low resistance measurement range. (10-3 ~ 107 Ohm)
Production Engeneering,Quality Control, R&D.


The measurement range has been expanded to 9,999¡¿10-3 ~ 107 Ohm.
The 18 measurements files can be installed and a 4-pin probe method simply and accurately measures the resistivity of materials. A 5.7 inch LCD monitor makes for easy operation. Remote operation from a PC can be done through a RS232C port. The MCP probe enables one-touch, direct reading of [Ohm],[Ohm/sq.],and [Ohm¡¤cm]. It has a data memory of 1000pieces.


Conductive Paint, Conductive paste, Conductive Plastics, Conductive rubber, Conductive films, metallic thin films,amorphous silicone,antistatic materials, EMI shiled materials, Conductive fiber, Conductive ceramics,etc.


Methd of Measurement 4-pin probe,constant-current method
Mesurement range
 10-3 10-2 10-1 100 101 102 103 104 105 106 107
Supplied current 100mA 10mA 1mA 100µA 10µA 1µA 0.1µA
Measurement trueness
(¡¾ % of reading ¡¾ digits)		 ¡¾2.0%
¡¾20dgt		 ¡¾1.0%
¡¾5dgt		 ¡¾1.0%
¡¾3dgt		 ¡¾0.5%
¡¾3dgt		 ¡¾1.0%
¡¾3dgt		 ¡¾2.0%
¡¾5dgt
Power source AC85V~264V 47~63Hz 92VA
Memory back up Approximately 3 years (uses lithium battery)
4-pin Probe MCP probe (ASP,ESP,PSP,BSP,QPP,TFP types)
4-pin calculating function For rectangular and circular samples of 0.001mm-9999mm.Rectangular samples : height and width.0.001mm-9999mm.Circular samples:diameter,0.1mm-9999mm;thickness,0.001A-9999mm
Data output RS232C
Dimensions,Weight W330¡¿D270¡¿H88mm, 3.4kg
Standard
accessories		 ASP probe : MCP-HP03P (4-pins,inter-pin distance 5mm,pin points 0.37R)
Probe checker : MCP-TRF1 (1Ohm,for ASP probe)



For mon-uniform samples.interpin
distance 5mm,pin points ¨ª2, supring perssure 240g/pin.
MCP-TP08P
For small samples.inter-pindistance 1.5mm,pin points0.26R,spring pressure 70g/pin.
MCP-TP06P
For minute samples.Squaretype.Inter-pin distance 1.5mm,pi points 0.26R, spring pressure 70g/pin.MCP-TPQPP
For large samples.inter-pin distance 2.2mm,pin points 0.37R, spring pressure 210g/pin.MCP-TP05P
For thin films. Inter-pin distance 1.0mm,pin points 0.15R, spring pressure 50g/pin MCP-TFP