(10
– 57 g/hr / 6 – 10% wt concentration)
Oxygen Concentration Ozone Generation
A Quantum Leap in Ozone Generation — The Osmonics E-Series ozone system
exceeds the industry standard for customers demanding stable ozone output and
reliability. The performance is unequalled in the industry, with the capability
of reliably producing high concentration ozone – 6 to 10% by weight, while
efficiently producing up to 3 ppd (57 g/hr) of ozone.
The Ozone generation system uses Osmonics E-Series flat plate ozone generator
and an oxygen generation system. The standard system design is dual rated for
50/60 Hz operation and requires one single point power connection.
Features
and Benefits
- Compact – wall mountable design
Allows easy installation
- Stainless steel frame for wall mounting
- Pressure regulators for air into and oxygen out of the oxygen concentrator
- Pressure regulator for cooling water
- Cooling water low flow switch and automatic inlet on/off valve
- Supply air filtration (Particle filter – 1 micron, Oil Coalescing
filter, and Hydrocarbon Adsorption filter)
- High concentration ozone (6 – 10% by weight)
Low parent gas usage equals low operating cost
- Advanced control system
Extremely flexible control system that includes interfaces for front panel
operation, from an easy-to-use local mode to a remote mode controlled by an
industry standard 4 – 20 mA current loop
- Durable ceramic flat plate cell construction
- Worldwide input power compatibility
It will work anywhere in the world with single-phase power
- Environmentally protected in a 304 stainless steel enclosure
Applications
- Bottled Water
- Industrial Processes
- Aquatic Life Support Systems
- Pharmaceutical
- Food Processing
Pre-Engineered
Accessories
- Ozone Injection Skids
- 316LSS Contact Towers
- Ozone Destruct Modules
- Ambient Ozone Monitors
- Dissolved Ozone Monitors
Product
Specifications
Performance
Characteristics1
- Oxygen Concentrator
- Gas Output: 25 scfh at 90% oxygen weight conc.
- Parent Gas: Compressed Air
- Drying Capability: -100¡ÆF dew point
- Ozone Generator
- Ozone Output: 0.5 – 3 lbs/day
- Ozone Concentration: 10 – 6%
- Gas Outlet Pressure: 4 – 15 psig
Materials of Construction
- Frame: 304 Stainless Steel
- Enclosure: Brushed Stainless Steel
- O2/O3 Gas Tubing: PTFE/304 Stainless Steel
- Air Tubing: Polypropylene
- Water Tubing: Polypropylene
Installation and Utility Requirements
- Cooling Water Flow2: 0.5 gpm (at
20 – 40 psig) at 50 – 85¡ÆF (at or above ambient dew point)
- Cooling Water Inlet/Outlet: 0.25-inch FNPT
- Compressed Air Flow: 5.5 cfm at 45 psig (11 scfm)
- Compressed Air Inlet: 0.5-inch FNPT
- Ozone Gas Piping Outlet: 0.25-inch MNPT
- Electrical Power: 208 – 240 VAC, 1-Phase, 50/60 Hz, 3.5 Amps
Full Load
- Frame Dimensions: 71-inch height x 18-inch width x 17-inch depth
- Approximate Shipping Weight: 200 lbs
Control
Input/Output
- Inputs
- Room Ozone Alarm: Dry Contact Close to run
- Remote Enable: Dry Contact Close to run
- Remote Control: 4 – 20 mA (0 – 100% Output)
- Outputs
- Remote Ready: Dry Contact
- Alarm: Dry Contact Close Fault
- Local
- Display: Backlit Graphic LCD Display
- Keyboard: Sealed 16 Key Membrane
1. Performance
Characteristics based on a parent gas inlet pressure of 15 psi (consisting of
>90% oxygen at a maximum dew point of -80¡ÆF) and 70¡ÆF (21¡ÆC) cooling water
flowing at 0.5 gpm (1.9 l/m) for Model EO3-1.
2. Cooling Water shall be potable quality or better. Minimum Temperature to
be greater than ambient dew point.
Ozone
Concentration vs. Output
Oxygen
Gas Flow vs. Output
