T-Mike EL

[Features][Display][Description][Material][Power Supply] [Operation][Logging][Kit Contents][Warranty]

The StressTel T-Mike EL is a compact, easy-to-use and rugged thickness gauge. The T-Mike EL has an on-board datalogger capable of storing over 40,000 readings in user definable data files. Thickness readings are stored by simply pressing the ENTER key. Readings can be sent directly to a printer or downloaded to a PC with the supplied software.

The T-Mike also features high speed scanning for minimum thickness capture; a B-scan display for graphical representation of thickness over time; an adjustable alarm illuminates LEDs to alert the operator when thickness values are above or below a set value; and a DIFF function displays the positive or negative difference between the thickness measurement and preset value.

Other key features include: auto calibration; sealed case; amber colored display; measuring range of 0.025 inch to 19.999 inch; 300 hours battery life with (4) alkaline or NiCad "AA" batteries and two year warranty.

The T Mike EL is supplied with a 1/4" x 5 MHz dual element transducer. The transducer has a potted four-foot, wear resistant cable with lemo quick disconnect connector. StressTel offers a wide range of other transducers to meet your application requirements.

Unit Features

1.

Lemo quick-disconnect connectors.

2.

Bi-directional RS 232 data port/battery charger connector.

3.

Built-in auto-probe zero block.

4.

Coupling indicator.

5.

Alarm indicator indicates alarm active.

6.

Current data file.

7.

Amount of memory available.

8.

Red alarm LED indicator.

9.

Clears stored reading and entire memory.

10.

Arrow keys for changing location within a file.

11.

Power key.

12.

Accesses files.

13.

Stores readings.

14.

Accesses calibration and memory modes.

15.

Stored thickness reading

16.

Reading location.

17.

Digital thickness reading.

18.

Operator selectable Metric or English units.

19.

Backlit LCD indicates modes, measurements, icons and B-scan.

Display

Measurements:

4 1/2 -digit amber backlight LCD.

Coupling Check:

NO ECHO display.

Battery Check:

LOW BAT display flashes to indicate battery replacement.

Units:

English/Metric selectable
IN or MM displayed

Description

Unit size:

2.5 inches wide (64 mm)
6.0 inches long (152 mm)
1.25 inches deep (33 mm)
14 ounces (397 grams)

Case:

Sealed aluminum case.

Keyboard:

Water resistant keypad.

Material

One step calibration for steels, aluminum, metals, glass and plastics.

Power Supply

Four AA alkaline or NiCad batteries that are interchangeable and easy to access.
Approximately 300 hours of continuous operation - 80 hours with backlight.

Operation

tmikeldrawing

Measuring range:

0.025 to 19.999 inches (.635 mm to 500 mm) depending on transducer, surface condition, temperature and material.

Display resolution:

0.001 inch ( 0.01mm).

Material velocity range:

0.01 to 0.59 inches per micro-second.

Allowable surface temperature:

0 F to 300 F (-18 C to 150 C).
High temperature probes available to 650 F.

Scan Mode:

Displays minimum thickness during scanning.

Red LED:

LED illuminates when a reading falls below set target range.

B-Scan:

Provides graphical representation of thickness variations.

Diff:

Displays positive or negative difference to preset value.

Data Logging

Configuration:

Alpha numeric identification of files, locations and comments.

Memory:

Stores over 40,000 readings in over 100 files.

Communication:

Bi-directional RS 232 serial interface with selectable baud rate.

T-Mike EL Kit Contents

*

T-Mike EL Ultrasonic Thickness Gauge

*

1/4" x 5 MHz Transducer (style user selectable from list).

*

Operation Manual.

*

DataTel Program Disk.

*

Data Transfer Cable.

*

25/9 pin Connector/Adapter (for use with cable).

*

Couplant.

*

Four "AA" Batteries (Alkaline or NiCad).

*

Battery Charger (if NiCad battery operated).

*

Plastic Instrument Accessory Case.

*

Certificate of Calibration.

Warranty

All T-Mike Corrosion Thickness Gauges have a full two-year warranty on parts and labor excluding batteries, transducer and cable.  Specifications subject to change without notice.

Back to Top


[StressTel]  [Thickness] [Flaw Detector] [Transducers] [Bolting

Korins Co.,Ltd.
Rm301, #24-2, Youido-Dong, Youngdungpo-Ku, Seoul, Korea
Tel. : (02)780-4848 Fax.:(02)780-1244, 786-1244

sales@korins.com