Multi -Channel level Measurement
Signal level Meter is designed for VHF, UHF, and cable TV. Additional standard or customer plans are available from the factory. The signal level is displayed on the large LCD screen in the form of a bar graph with digital readout. This instrument is best suited to measuring the receiving level, electric-field strength, gain and loss of Cable TV equipment can be used for such purpose as distributing, home community receiving and Cable TV facility construction work.

video level
measurement
A/V & C/N
spectrum analyze
panoramic scanning
Multi-channel
audio & video level
measurement
 voltage of
battery measurement		 level measurement
of some frequency		 trunk line voltage
measurement


General Specifications

Input Frequency : 46 to 870 MHz steps
Receiving Channels: are available according to customers requirements
Level Measuring Range:

1. 30 to 120 dBuV (0dbuV=1uV, 75 terminated)
2. -30 to +60 dBmV(0dBmV=1mV, 75 terminated)
Measurement Accuracy: + 3dB or less
Input Impedance: 75
Measurement Bandwidth: Approx. 280kHz
Imposed Voltage Measurement:

1. AC voltage: 100 Vrms max.50/60 Hz
2. DC voltage: 60 V max.
Measurement Resolution: 0.1 V
Measurement Accuracy: + 5% + 1V
Spec-guaranteed Temperature :0 to 40¡Æ
Humidity: 30 to 85% RH
Storage Temperature: -10 to 50¡Æ
SPECIFICATIONS

MODEL FUNCTION MODE OF
ADJUST CHANNEL
AND FREQUENCY		 WEIGHT(KG) DIMENSIONS(CM)
S8800 Audio & video level measurement, A/V, C/N measurement, 16*2 dots LCD with LED backlight, digital display, auto-shutoff if there is no key enter. Knob 0.9kg

16*13*6
S8801 Same as above Up & down keys 0.9kg 16*13*6
S9801
  1. Signal levels up to 100 channels can be displayed with bar graph at the same time. Auto scan and store the result of these channels.
  2. Display channel number and corresponding fields intensity of the 5 Max., 5 Min and dB of the system measured by figure on the same screen. Store the result.
  3. Auto scan audio & video field intensity of 48 channels. Store and display the result at the same screen.
  4. Spectrum analyze and store the result.
  5. Setup function include shutoff, channel number stored and contrast of LCD
  6. A/V, C/N measurement.
  7. 128*64 dots LCD
  8. You can setup auto-shutoff 5 min., 10 min. after no key enter,. or always turning on.
 Figure Key 0.8kg Hand-hold

| Signal Level Meter | Digital Satellite Receiver | MMDS Events |